Nye heavy-duty excavator jibs pin-on in place of the bucket and increase reach for a wide variety of dredging, ditching, pond excavation, demolition, and high-reach applications.
Nye Jibs are available in 3 mounting configurations:
Type 1: Direct Pin – with increased pin center distance (Not Pin-Grabber compatible). Type 1 is the preferred mounting configuration because the increased mounting pin center distance increases the available tangential force at the Jib tip, and/or reduces the linkage forces for any given load.
Type 2: Pin-On – with standard pin center distance (Pin-Grabber compatible). Type 2 can be direct pinned, and can also be used with Pin-Grabber type Quick Attach Units. The owner must determine strength and suitability of the Pin-Grabber they intend to use.
Type 3: Dedicated Quick Coupler – with brand specific QC receiver group. Type 3 can only be mounted on a machine equipped with the corresponding Dedicated Quick Coupler, including Symmetric Type, Wedge-Style and other 3rd party systems. The owner must determine the strength and suitability of the Dedicated Quick Coupler they intend to use.
Standard bucket linkages and cylinders are available. All Nye Jibs are built with QT100 structural steel for maximum strength and minimum weight.
Call for a quote today, let us put our experience to work for you.
Nye HP (High Performance) buckets are designed to boost production. Nye HP buckets are built with thinner, stronger heat-treated alloy steels so they are very light, allowing faster cycle times. Designed specifically for basement contractors working in light to moderate conditions.
Heavy-Duty – buckets are built with extra thick materials in all wear areas and are designed for severe rock and shale applications where extra impact and abrasion resistance is required.
At Nye, we design, build, modify and repair more types of excavator boom systems than any other manufacturer.
We use only the finest quality QT100 steel plate, low hydrogen flux-core welding wire and hardened alloy pins & bushings.
Custom Ditch Buckets designed and built for all applications; We design special purpose buckets that meet and exceed the specifications of our most demanding customers.
Thirty years of Ditch Bucket design at your disposal. We offer all types, styles, and sizes: single radius, dual radius, flat bottom, round bottom, pin on, QC, horizontal straps, vertical straps, teeth, bolt-on edges, call us…
Nye DGX premium quality demolition grapples are built for the most severe high-speed demolition, rock, and waste handling applications. DGX grapples feature a fully-boxed structural design. The continuous QT100 stringers extend all the way from the tips to the bridge forming super strong quenched and tempered box-sections, arranged both vertically, for bending, and horizontally, for torsional loads.
DGX grapple tines are exposed through the back skin to provide extreme wear and impact resistance. Extra thick AR400 wear plates in strategic locations give long life and are easy to replace when needed.
Nye fast acting DGX grapples are simple to install, no hydraulics are required. Pin-on, Quick Coupler and Pin-Grabber versions mount in place of the bucket, a three position bracket with a rigid brace welds to the underside of the excavator arm.
Continuous-tine design makes Nye DGX grapples the strongest in the world! Our superior performance under the worst conditions proves this claim.