The Nye TDX is the ultimate high performance solution for deep excavation. Pins-on as a second member in place of a standard arm. The mounting bracket is replaceable for use with different machines of the same class. Built with premium quality QT100 structural plate throughout. The proven rack and pinion design with dual hydraulic planetary drive motors provides fast extend and retract function with unmatched durability. Replaceable aluminum-bronze wear blocks ensure smooth operation. Interface plate allows mounting of your choice of dangling, positioned, or rotating hydraulic attachments. Lights and camera with cab mounted display allows the operator to have a full view of down hole operations. Wide range of custom attachment options for hammering, mucking, and hard excavating. The Nye TDX is designed and built in Canada.
Nye invented the independent tine grapple bucket over 30 years ago. Our latest EXI series “Mantis” buckets feature twin self-synchronized hydraulic cylinders with tines that fold up and park over-center when not in use. The independent tines by-pass either side of the stick so you get maximum range of motion for uninterrupted digging. Ridged multi-tine versions are available for applications requiring more than two tines.
The easy to service hydraulic cylinders are protected by an integrated Load Control valve which provides load holding and relieving, synchronization, speed control and hose management functions. The cylinders are protected, which means damage due to overload and drift due to leakage is virtually eliminated. Servicing is simple and there are no complex sliding rotary seals or internal splines or gears to grind and smash.
Independent tines conform to odd shaped loads for a secure grip. The tines are tapered and fully boxed QT100 steel for maximum strength and durability. Serrations in the tines provide the right balance of grip without damaging plastic culverts and materials used in road building.
The over-center function gives the tines 180 degrees of rotation without the need for linkages or complex “cuckoo-clock” rotary actuators. With gravity assist, the tines fold-up over the top of the bucket to allow full, uncompromising digging functionality. The bucket profile is not altered by the tines or any bulky actuator mechanism, so you get the best digging bucket with a fully tapered body, dual basket radii and proper wear plates just like a regular bucket.
The Tomahawk is a unique tool for sizing and shaping carbonate sedimentary rock.
Nye engineers have perfected the art of turning ideas, and design concepts into profitable working solutions. 3D modeling, and force vector analysis, helps ensure that form follows function, and maximum performance is attained.
This is a tool that quickly cuts, and trims dimensional limestone. The TMK design is based on our customer’s own ideas. A 7″ thick solid steel baseplate, and 11,000 pound gross mass helps the TMK slice through thick slabs easily, without pounding the carrier.
The Tomahawk uses Nye’s patented Cleaver cutting edge system, which permits rapid rotation, and replacement of the hardened AR500 alloy blades. Replacement blades are resharpened in our Mississauga CNC milling facility.
Like the Nye LSB limestone bucket, the TMK has helped revolutionize the production of high value dimensional stone products in the Silurian and Devonian limestone and dolostone formations of Southern Ontario.
New for 2023, the Nye CPK pulverizer features Quick Change “pin-on” teeth.
CPK series pulverizers offer the same great features as the New CP5 series with the added convenience of quick change “pin-on” teeth that can be changed in the field without the need for a welder.
CPK teeth offer the same high performance bypass crushing abilities as the CP5 series and are completely interchangeable. CPK teeth can be rotated from top to bottom and from side to side quickly to maximize productivity and tooth life.
Aggressive incisor style fangs protrude from the nose-plate for better grasping and puncturing of materials while, at the same time, providing better wear protection for the new high angle nose-plates.
Built entirely from extra thick quenched and tempered QT100 alloy plate, the new CPK series pinches, grips and crushes materials while maintaining the advanced characteristics of the CP5.
The replaceable AR500 alloy teeth are pinned in place with heavy duty hardened steel pins and locks making it the ideal option for fast and efficient tooth replacement.
All Nye Concrete Pulverizers are easy to install, safe, silent to operate and available in Direct-Pin, Quick-Coupler and Pin-Grabber compatible versions.
Pulverizer Feature Matrix
Nye CPX High Rupture Force Pulverizer.
The CPX is the latest in high-production concrete processing from the engineers at Nye. These revolutionary new, opposing-tooth pulverizers are designed for maximum performance in high-strength, steel-reinforced concrete. US and Canadian patents pending.
The unique tooth arrangement on the Patented CPX and ultra-high force (short jaw) CPX and CPH pulverizers work with direct tip-to-tip occlusion. This concentrates the rupture stress in one plane, directly between opposing teeth, maximizing cracking performance in all steel-reinforced concrete types.
Conventional pulverizer teeth typically bypass one-another, producing multiple shear planes. This results in lower rupture stresses applied to the material, and less than ideal cracking power. Conventional pulverizers also apply a “kinking action”, which tends to bunch and condense rebar into balls, producing a so-called “apocalyptic mess” of steel. CPX and CPH pulverizers tend to crack the concrete away, leaving the re-bar straighter, which can help with subsequent processing to produce marketable scrap.
CPX and CPH pulverizer front teeth protrude past the nose plates which facilitates fine picking and sorting of rebar and demolition debris on-site.
For the ultimate in high production concrete processing, nothing beats the performance of Nye CPX and CPH mechanical pulverizers.
Pulverizer Feature Matrix
New for 2023, the Nye CPG Opposing Tooth mechanical pulverizer with quick change teeth, outperforms hydraulic units in both primary and secondary crushing operations.
Biomimetic crushing jaws modeled after bone crushing wolves teeth, including canine fangs for grasping and puncturing material while protecting the nose-plate from wear.
Built entirely from extra thick QT100 quenched and tempered alloy plate.
The AR500 alloy teeth are secured with heavy duty alloy pins and locks. A variety of tooth types and profiles are available to suit on-site conditions and processing requirements.
Nye CPG Concrete Pulverizers are easy to install, safe, silent to operate and available in Direct-Pin, Quick-Coupler and Pin-Grabber compatible versions.
Pulverizer Feature Matrix
New for 2023, the Nye CP5 pulverizer outperforms hydraulic units in both primary and secondary crushing operations.
The Biomimetic crushing jaws are modeled after bone crushing wolves teeth, including canine fangs for grasping and puncturing material while protecting the nose-plate from wear.
Built entirely from extra thick quenched and tempered QT100 alloy plate.
The replaceable AR500 alloy teeth are welded in place, ensuring long life and simple maintenance by welding.
Nye Concrete Pulverizers are easy to install, safe, silent to operate and available in Direct-Pin, Quick-Coupler and Pin-Grabber compatible versions.
Pulverizer Feature Matrix
Nye CPH High Rupture Force Pulverizer.
The CPH is the latest in high-production concrete processing from the engineers at Nye. These revolutionary new, opposing-tooth pulverizers are designed for maximum performance in high-strength, steel-reinforced concrete.
The unique tooth arrangement on the Patented CPH and ultra-high force (short jaw) CPH pulverizers work with direct tip-to-tip occlusion. This concentrates the rupture stress in one plane, directly between opposing teeth, maximizing cracking performance in all steel-reinforced concrete types.
Conventional pulverizer teeth typically bypass one-another, producing multiple shear planes. This results in lower rupture stresses applied to the material, and less than ideal cracking power. Conventional pulverizers also apply a “kinking action”, which tends to bunch and condense rebar into balls, producing a so-called “apocalyptic mess” of steel. CPX and CPH pulverizers tend to crack the concrete away, leaving the re-bar straighter, which can help with subsequent processing to produce marketable scrap.
CPX and CPH pulverizer front teeth protrude past the nose plates which facilitates fine picking and sorting of rebar and demolition debris on-site.
For the ultimate in high production concrete processing, nothing beats the performance of Nye CPX and CPH mechanical pulverizers.
Pulverizer Feature Matrix
Jack Nye invented the hydraulic grapple bucket over 30 years ago. Our latest EXG series “Mantis” buckets feature twin hydraulic cylinders with a single thumb and tines that mesh with the bucket teeth. A strong bumper pad engages the stick providing maximum range of motion with minimal interference for digging.
The open cylinder design eliminates binding with stones and frozen mud. Servicing is simple. There are no linkages or complex “cuckoo-clock” rotary actuators, no sliding rotary seals or internal splines, no gears to grind and smash. In the open position, the cylinders extend in hydraulic relief as the tine pad contacts the excavator arm during bucket curl.
An optional hydraulic control valve provides load-holding, & relieving, speed control, and hose management functions. The valve protects the cylinders, so damage due to overload and drift due to leakage is eliminated.
The profiled tines provide a secure grip with tapered and fully boxed QT100 steel for maximum strength and durability.
Serrations in the tines provide the right balance of grip without damaging plastic culverts and materials used in road building.
The bucket profile is not altered by a bulky actuator mechanism, you get the best digging bucket with a fully tapered body, dual basket radii, and proper wear plates just like a regular bucket.
General Purpose – buckets are designed for normal digging conditions including light shale and rock. These buckets are heavier than most OEM buckets and are considered heavy-duty by most in the industry.