Industry: Sewer & Water Main

CBT Chuck Blade

The Nye CBT Tilt Chuck Blade features super strong QT100 front and rear beams.
The Heavy-duty double acting cylinders are strategically mounted low on the back, over a sloped bridge plate, which promotes self clearing of mud, stones and debris.
Heavy duty bolt-on edges are standard. The hydraulic control valve provides load holding/relieving, speed control, side hose hookup and hose management functions.
All Nye CBTs have a full 90° tilt range, 45° left and 45° right, with high holding power.
Built for outstanding strength, serviceability and long life. Nye CBTs are available in quick coupler and direct-pin versions.

Side Slinger Bucket

Nye Slinger Buckets are engineered to provide controlled side discharge on either side of the machine.
Dual reversible direct drive hydraulic motors are side mounted for easy accessibility and maintenance.
Both motors are fully adjustable to provide easy tensioning of the conveyor belt and hydraulic motors.
Nye exclusive dual direct drive hydraulic motors eliminate jamming, slipping and cogging.
SSB buckets spread materials left or right, and with an optional ejection chute cover, the operator can effectively control the drop of light materials in tight spaces.
Side sling buckets feature a replaceable heavy-duty conveyor belt with fully adjustable edge guides for consistent flow with a variety of materials.

Side Dump Bucket

Nye SDB Side Dump Bucket double as a conventional or lateral dumping bucket and is designed to outperform in hard to maneuver work sites. The main boxed frame is built to last with QT100 quenched and tempered steel plate and AR500 in critical wear areas. Heavy torque plates and heavy walled bushings tie the pivot together and prevent twisting and racking of the structure. Oversize pivot pins and bushings ensure durability and long life.
The single high-pressure cylinder with casing guard allows for optimum bucket positioning and controlled dumping under all working conditions.
Direct pin-on or Quick Coupler versions are available to suit virtually any machine.
Bucket base edge can be equipped with weld-on repointer, bolt-on segments or teeth.
Over-the-bucket forks are also available.

Loader Scoop Bucket

Nye LS1 Loader mounted front scoop bucket.
The Nye scoop bucket makes it easy to transfer back fill material from the stock pile to an excavator bucket. The excavator can then distribute the material in the trench as required.
The Nye scoop bucket outperforms and eliminates the need for a side dump bucket for back-filling.
Flat bottom design reduces stockpile waste (easier cleanup)
Nye scoop buckets are available in a variety of width and capacity configurations.
Direct pin-on and QC versions available.

GP Buckets

General Purpose – buckets are designed for normal digging conditions including light shale and rock. These buckets are heavier than most OEM buckets and are considered heavy-duty by most in the industry.

UHD Buckets

Ultra Heavy-Duty – These are the heaviest rock and demolition buckets we make. Originally designed in the 80’s for the most demanding shot-rock applications in Newfoundland and Northern Ontario. When you need extreme strength and wear resistance, specify Nye UHD.

Tilt Units

Nye tilt units have evolved alongside our tilt buckets. Our latest designs now feature 90 degrees of total rotation and the same heavy-duty double acting cylinders and hardened alloy pivot group as found in our long lasting tilt buckets.

Tilt Buckets

Nye Tilting Ditch Buckets have been continually improving over the last four decades. Our latest designs now feature a super strong one-piece QT100 front beam and twin double-acting hydraulic cylinders mounted low on the back where they belong, not on top or inside a compartment. Most models feature bolt-on edges and an onboard hydraulic control valve that provides load holding / relieving, speed control, and hose management functions.

Telescopic Extensions

Designed for deep excavating, ditching, dredging and pond work. Nye telescopic stick extensions pin-on in place of the OEM bucket, cylinder and linkages. No cutting or welding required. QT100 quenched and tempered structural steel construction for maximum strength and minimum weight. Available for excavators ranging from 20 to 85 tons.