MAX Grapples

Nye MAX grapples are designed for high capacity MSW (municipal solid waste) handling and for the most severe duty brush clearing applications.
Custom solid tine configurations available to provide high performance material handling in any environment.
Weld-on replaceable AR400 tine tips ensure high reliability and longer attachment life. The welded tips cannot fall off and damage down-stream processing equipment.
Engineered for maximum capacity, MAX grapples offer superior high speed bailing of large bulk loads. All quenched and tempered construction keeps weight down improving swing times and fuel efficiency.
Easy to install, safe and silent to operate MAX grapples are available in pin-on, quick coupler or pin-grabber compatible versions.

Rotating Log Grapples

Nye RHG rotating hydraulic log grapples are designed for production log loading under severe working conditions. The RHG series feature a super tough body structure with over-size pins & bushings that can take extreme pounding and prying. The wide tine openings allow easy, high-speed loading and placing of heavy logs.
Heavy-wall tubes tie the jaws together to prevent twisting and racking of the structure. Guarded high-pressure hydraulic cylinders provide ample clamping force under all working conditions. Full hydraulic tine-synchronization means no troublesome linkages or bell-cranks, the virtually indestructible divider/combiner valve keeps both tines in sync at all times.
Our heavy-duty rotators feature 3600 continuous rotation with oversized bearings and drive motors.
All RHG grapples are custom built to suit your excavator.
Direct pin-on or Quick Coupler versions are available to suit virtually any heavy-duty logging application.

Thumbs – progressive-link

Nye PT1 Progressive Link (pro-link) weld-on thumbs feature a unique single unit design, manufactured for quick and easy installation.
Heavy-duty biomimetic teeth, with serrations for extra grip, are welded solid to the base edge. The teeth mesh perfectly with your bucket because all Nye thumbs are custom built to suit your existing bucket and tooth arrangement.
The fully independent thumb linkage group is engineered to achieve 160° rotation. A simplified one-piece baseplate design means installation does not require disassembling or altering the factory pins or linkages.
Nye PT1 series pro-link thumbs are strong and versatile, built with quenched and tempered alloy steel to provide years of dependable service in the most demanding forestry and demolition applications.
Every Nye thumb is built to order so you get exactly the equipment you need – custom configurations are available to suit any application.

Side Slinger Bucket

Nye Slinger Buckets are engineered to provide controlled side discharge on either side of the machine.
Dual reversible direct drive hydraulic motors are side mounted for easy accessibility and maintenance.
Both motors are fully adjustable to provide easy tensioning of the conveyor belt and hydraulic motors.
Nye exclusive dual direct drive hydraulic motors eliminate jamming, slipping and cogging.
SSB buckets spread materials left or right, and with an optional ejection chute cover, the operator can effectively control the drop of light materials in tight spaces.
Side sling buckets feature a replaceable heavy-duty conveyor belt with fully adjustable edge guides for consistent flow with a variety of materials.

Skeleton Bucket

Nye Skeleton Buckets are engineered using abrasion resistant and high strength materials to withstand the most severe service.
Design types are available with perforated baskets or interlocked ribs and cross bars that meet the most demanding custom material separation applications.
Both designs do not contain any moving parts and exceed OEM specs.
Tapered vertically and horizontally along with a dual compounded radii profile, SRE buckets allow for easy filling and dumping effectively reducing bottom wear.

Skeleton Buckets are available in various sizes, widths, and custom rib spacing configurations along with customers’ choice of ground engaging tools.

Side Dump Bucket

Nye SDB Side Dump Bucket double as a conventional or lateral dumping bucket and is designed to outperform in hard to maneuver work sites. The main boxed frame is built to last with QT100 quenched and tempered steel plate and AR500 in critical wear areas. Heavy torque plates and heavy walled bushings tie the pivot together and prevent twisting and racking of the structure. Oversize pivot pins and bushings ensure durability and long life.
The single high-pressure cylinder with casing guard allows for optimum bucket positioning and controlled dumping under all working conditions.
Direct pin-on or Quick Coupler versions are available to suit virtually any machine.
Bucket base edge can be equipped with weld-on repointer, bolt-on segments or teeth.
Over-the-bucket forks are also available.

Rotating Loader Forks

Nye builds a wide variety of custom rotating Loader Forks that allow easy handling of piles, lumber, shoring, pipes, and logs.
Built for handling shoring equipment and erecting drill casings, this versatile attachment features extra thick heavy-duty forged forks that ensure years of reliability and dependability.
Oversize alloy pivot pins and bushings ensure durability and long life.
Dual direct acting rotate cylinders with overload protection and oversize excavator slewing ring are virtually indestructible. No delicate gears, motors or bearings to smash.
Direct pin-on or Quick Coupler mounting options. Custom versions are available to suit virtually any application.

Call us today for a quote. Let us build the custom forks for your next job!

Loader Scoop Bucket

Nye LS1 Loader mounted front scoop bucket.
The Nye scoop bucket makes it easy to transfer back fill material from the stock pile to an excavator bucket. The excavator can then distribute the material in the trench as required.
The Nye scoop bucket outperforms and eliminates the need for a side dump bucket for back-filling.
Flat bottom design reduces stockpile waste (easier cleanup)
Nye scoop buckets are available in a variety of width and capacity configurations.
Direct pin-on and QC versions available.

Garbage Shear

Nye GSX Garbage shears are designed to cut Municipal Solid Waste into fine pieces for hi-density packing into trucks, saving transport costs and space in landfills over time. The GSX series features jaws with biomimetic teeth that bypass in shear, providing the right solution for mass waste handling and processing in limited spaces. The main frame is built to last with QT100 quenched and tempered steel plate and AR500 in critical wear areas. Heavy wall torque tubes tie the jaws together and prevent twisting and racking of the structure. Oversize pivot pins and bushings ensure durability and long life. The optional high-pressure brace cylinder with rod guard allows optimum jaw positioning under all working conditions. Direct pin-on or Quick Coupler versions are available to suit virtually any heavy duty MSW application.

Loader Grab Forks

Nye GF Loader Forks were originally designed for loading large dimensional stone in quarries. The GF series feature heavy-duty, pin replaceable “blade” forks with fully tapered tips. The main frame is built to last with QT100 quenched and tempered steel plate and AR400 in critical wear areas. Heavy torque tubes tie the tines together and prevent twisting and racking of the structure. The top grabs are hydraulically operated by top mounted double acting cylinders that enable the secure handling of even the largest stone pieces. Oversize pivot pins and bushings ensure durability and long life. Direct pin-on or Quick Coupler mounting options. Custom versions are available to suit virtually any application.