The Nye TDX, is a unique dual hydraulic telescopic high speed deeper Arm that operates using a static or rotating hydraulic attachment.
Nye’s new TDX features a unique and advance hydraulic controlled speed in both directions allowing for increased production and performance.
Built entirely from extra thick quenched and tempered Abrasive Resistant 400 plate.
Advanced design – Ideally suited for deep and complex excavation projects, the TDX telescopic three section can extend and retract at variable speeds.
Nye TDX is easy to install, safe, silent to operate and available in Direct-Pin versions for a variety of machines.
Nye invented the independent tine grapple bucket over 30 years ago. Our latest EXI series “Mantis” buckets feature twin self-synchronized hydraulic cylinders with tines that fold up and park over-center when not in use. The independent tines by-pass either side of the stick so you get maximum range of motion for uninterrupted digging. Ridged multi-tine versions are available for applications requiring more than two tines.
The easy to service hydraulic cylinders are protected by an integrated Load Control valve which provides load holding and relieving, synchronization, speed control and hose management functions. The cylinders are protected, which means damage due to overload and drift due to leakage is virtually eliminated. Servicing is simple and there are no complex sliding rotary seals or internal splines or gears to grind and smash.
Independent tines conform to odd shaped loads for a secure grip. The tines are tapered and fully boxed QT100 steel for maximum strength and durability. Serrations in the tines provide the right balance of grip without damaging plastic culverts and materials used in road building.
The over-center function gives the tines 180 degrees of rotation without the need for linkages or complex “cuckoo-clock” rotary actuators. With gravity assist, the tines fold-up over the top of the bucket to allow full, uncompromising digging functionality. The bucket profile is not altered by the tines or any bulky actuator mechanism, so you get the best digging bucket with a fully tapered body, dual basket radii and proper wear plates just like a regular bucket.
The Tomahawk is a unique tool for sizing and shaping carbonate sedimentary rock.
Nye engineers have perfected the art of turning ideas, and design concepts into profitable working solutions. 3D modeling, and force vector analysis, helps ensure that form follows function, and maximum performance is attained.
This is a tool that quickly cuts, and trims dimensional limestone. The TMK design is based on our customer’s own ideas. A 7″ thick solid steel baseplate, and 11,000 pound gross mass helps the TMK slice through thick slabs easily, without pounding the carrier.
The Tomahawk uses Nye’s patented Cleaver cutting edge system, which permits rapid rotation, and replacement of the hardened AR500 alloy blades. Replacement blades are resharpened in our Mississauga CNC milling facility.
Like the Nye LSB limestone bucket, the TMK has helped revolutionize the production of high value dimensional stone products in the Silurian and Devonian limestone and dolostone formations of Southern Ontario.
The Nye CCS heavy duty Cross Cutting Shear is our solution for high production log cross-cutting operations under the most demanding conditions.
The CCS features a profiled AR500 main cutting blade with a convex edge for maximum strength and toughness. This is the same CNC sculpted full-convex edge used on our premium SHX compound blade stump harvesters.
Dual AR400 anvils provide a bypass type striking surface for the blade, making quick work of large logs, stumps and roots while protecting the edge.
The replaceable AR400 teeth and CNC contoured piercing tip are welded-in, so they won’t fall out and damage grinders and downstream equipment.
Nye CCS shears are easy to install, safe, silent to operate and available in Direct Pin, Pin Grabber and Quick Coupler versions.
The Nye CBT Tilt Chuck Blade features super strong QT100 front and rear beams.
The Heavy-duty double acting cylinders are strategically mounted low on the back, over a sloped bridge plate, which promotes self clearing of mud, stones and debris.
Heavy duty bolt-on edges are standard. The hydraulic control valve provides load holding/relieving, speed control, side hose hookup and hose management functions.
All Nye CBTs have a full 90° tilt range, 45° left and 45° right, with high holding power.
Built for outstanding strength, serviceability and long life. Nye CBTs are available in quick coupler and direct-pin versions.
Jack Nye invented the hydraulic grapple bucket over 30 years ago. Our latest EXG series “Mantis” buckets feature twin hydraulic cylinders with a single thumb and tines that mesh with the bucket teeth. A strong bumper pad engages the stick providing maximum range of motion with minimal interference for digging.
The open cylinder design eliminates binding with stones and frozen mud. Servicing is simple. There are no linkages or complex “cuckoo-clock” rotary actuators, no sliding rotary seals or internal splines, no gears to grind and smash. In the open position, the cylinders extend in hydraulic relief as the tine pad contacts the excavator arm during bucket curl.
An optional hydraulic control valve provides load-holding, & relieving, speed control, and hose management functions. The valve protects the cylinders, so damage due to overload and drift due to leakage is eliminated.
The profiled tines provide a secure grip with tapered and fully boxed QT100 steel for maximum strength and durability.
Serrations in the tines provide the right balance of grip without damaging plastic culverts and materials used in road building.
The bucket profile is not altered by a bulky actuator mechanism, you get the best digging bucket with a fully tapered body, dual basket radii, and proper wear plates just like a regular bucket.
Nye Slinger Buckets are engineered to provide controlled side discharge on either side of the machine.
Dual reversible direct drive hydraulic motors are side mounted for easy accessibility and maintenance.
Both motors are fully adjustable to provide easy tensioning of the conveyor belt and hydraulic motors.
Nye exclusive dual direct drive hydraulic motors eliminate jamming, slipping and cogging.
SSB buckets spread materials left or right, and with an optional ejection chute cover, the operator can effectively control the drop of light materials in tight spaces.
Side sling buckets feature a replaceable heavy-duty conveyor belt with fully adjustable edge guides for consistent flow with a variety of materials.
Nye Skeleton Buckets are engineered using abrasion resistant and high strength materials to withstand the most severe service.
Design types are available with perforated baskets or interlocked ribs and cross bars that meet the most demanding custom material separation applications.
Both designs do not contain any moving parts and exceed OEM specs.
Tapered vertically and horizontally along with a dual compounded radii profile, SRE buckets allow for easy filling and dumping effectively reducing bottom wear.
Skeleton Buckets are available in various sizes, widths, and custom rib spacing configurations along with customers’ choice of ground engaging tools.
Nye SDB Side Dump Bucket double as a conventional or lateral dumping bucket and is designed to outperform in hard to maneuver work sites. The main boxed frame is built to last with QT100 quenched and tempered steel plate and AR500 in critical wear areas. Heavy torque plates and heavy walled bushings tie the pivot together and prevent twisting and racking of the structure. Oversize pivot pins and bushings ensure durability and long life.
The single high-pressure cylinder with casing guard allows for optimum bucket positioning and controlled dumping under all working conditions.
Direct pin-on or Quick Coupler versions are available to suit virtually any machine.
Bucket base edge can be equipped with weld-on repointer, bolt-on segments or teeth.
Over-the-bucket forks are also available.
Nye LS1 Loader mounted front scoop bucket.
The Nye scoop bucket makes it easy to transfer back fill material from the stock pile to an excavator bucket. The excavator can then distribute the material in the trench as required.
The Nye scoop bucket outperforms and eliminates the need for a side dump bucket for back-filling.
Flat bottom design reduces stockpile waste (easier cleanup)
Nye scoop buckets are available in a variety of width and capacity configurations.
Direct pin-on and QC versions available.